Conversion

Noise insulation with Alubutyl
AllConversionInsulation / isolationMB Sprinter

Noise insulation with Alubutyl

To minimize the general loud and rattling background noise of a cargo van, we will put up noise insulation in our Sprinter in the course of the van conversion. If you ever drove a cargo ...
Campervan insulation: Basics
AllConversionInsulation / isolationMB Sprinter

Campervan insulation: Basics

What you need to know about insulating a Campervan: useful and practical basics & facts Why should you insulate your Campervan? In cold areas (e.g. Alaska or Patagonia) the cold ...
Sub-construction of wooden slats
AllConversionFlooringMB Sprinter

Sub-construction of wooden slats

The sub-construction is important and fundamental to install the new floor plate as well as the future furniture and interior of the Sprintervan. Our basis are spruce slats glued to the ...
Removing the old floor panel
AllConversionFlooringMB Sprinter

Removing the old floor panel

It sure is a small surprise to find out what's beneath the original floor plate. Close your eyes and hope for the best? Rather not, because the floor is the base of the future interior build ...
How to readjust the back doors of the Sprinter 316 CDI in 7 steps
AllConversionMB Sprinter

How to readjust the back doors of the Sprinter 316 CDI in 7 steps

If the doors do not close correctly anymore, they have to be readjusted. We had to change the door hinges to install our spare wheel holder, so they are actually the reason we had to ...
Installing the spare wheel holder & changing the door hinges
AllConversionMB SprinterOutside installations

Installing the spare wheel holder & changing the door hinges

Before we could install our new spare wheel holder to the back door, we had to change the 270 degree door hinges of our Sprinter to 180 degree hinges. No sooner said than done! Regarding ...
Awning (Part 3) Accessory: LED lights
AllAwningConversionMB SprinterOutside installations

Awning (Part 3) Accessory: LED lights

Fiamma offers a great range of accessories for campervan awnings, such as wind baffles, bars and hooks. We equipped our awning with LED lights on the awning arms. The LED light strips ...
Awning (Part 2) Installing the brackets of the Fiamma F65 S for the supporting legs
AllAwningConversionMB SprinterOutside installations

Awning (Part 2) Installing the brackets of the Fiamma F65 S for the supporting legs

Because of the height of our 4WD Sprinter, the supporting legs of the awning Fiamma F65 S do not reach the ground! That’s why we installed the brackets to the wall of the vehicle. To ...
Awning (Part 1) Installation of the Fiamma F65 S
AllAwningConversionMB SprinterOutside installations

Awning (Part 1) Installation of the Fiamma F65 S

We want to make our small living space as big as possible, that’s why we expand it by some outside space, like a patio. Therefore we equip our Sprinter with an awning: the Fiamma F65 ...
LED Light Bar
AllConversionMB SprinterOutside installations

LED Light Bar

May there be more light: Front and back headlights, working headlights and now a LED Light Bar mounted to the roof of our Sprinter! Big cities like our hometown Hamburg, Germany have ...